222 Exhibition Street
End-of-trip
222 Exhibition Street
End-of-trip
Client: LaSalle Investment Management
Architect: Gray Puksand
Builder: Renascent Constructions
Location: Melbourne, VIC
A total of 384 lockers were delivered for the end-of-trip facilities at 222 Exhibition Street.
Configured as PS2 hanging lockers, the system incorporates integrated bench seating and shoe storage throughout the change facilities.
Finished in Laminex Tawny Linewood with grain-matched locker doors and end panels, the locker banks are integrated alongside airing cupboards, ironing stations and upholstered ottomans within the amenities environment.
Access is managed via Ojmar OCS code locks, configurable for either shared or dedicated user modes depending on operational requirements.
Locker configurations were adjusted during construction to accommodate revised floor plan layouts within the refurbishment works.
Project Details
| Lockers | 384 × custom 2-tier lockers |
| Configuration | Hanging |
| Finishes | Laminate – Laminex Tawny Linewood; grain-matched detailing |
| Locks | Ojmar OCS code locks |
| Accessories | Integrated bench seating and shoe storage; airing cupboards; ironing stations; upholstered ottomans; numbering |
End-of-trip locker considerations
Made for commuter
Shared and
allocated use
Locker layouts and lock systems
configured around shared daily use and high-frequency user turnover.
Lock systems
designed around use
Lock systems configured around shared-use operation, user turnover and facilities management requirements.
Systems may include mechanical, digital, RFID or smart access depending on operational, durability and management requirements.
Wet areas
& ventilation
Materials and hardware selected around moisture exposure, cleaning requirements and long-term durability matched with locker systems designed to support airflow for activewear, shoes, helmets and damp kit.
Mixed locker
environments
Shelving, hanging and device lockers with integrated seating combined within coordinated layouts.
Projects designed by
Designed around your project
Lockin lockers are manufactured to order and configured around the needs of each project - from dimensions and materials through to layouts, locking systems and accessories.
Flexible dimensions & layouts
Locker widths, heights, depths and internal configurations can all be adjusted to suit project requirements, available space and user needs.
Material & finish
flexibility
Available in laminate, steel or hybrid constructions, with commercial finishes including timber-look laminates, powdercoat colours, perforations and custom graphics.
Integrated lock & accessory systems
Locker systems can be configured with mechanical, digital, RFID or hardwired locking systems, alongside accessories such as seating, charging, mail slots, ironing stations and drying facilities.
Built for project-specific applicators
From workplace and education environments through to elite sports facilities and custom operational requirements, Lockin systems can be adapted to suit unique project briefs.
Specifier Resources
Download BIM objects, and Revit families built to inform and steamline design, project coordination and technical specification.
Locker planning insights
Common end-of-trip locker planning considerations that will help prevent operational, maintenance and user-experience issues later
Shared-use
operation
Most end-of-trip environments operate as shared-use systems. Lockers and lock systems should support intuitive and reliable shared-use operation across high- frequency daily use.
Peak-use periods before and after work can create concentrated movement through locker areas. Locker layouts should consider circulation widths, bench locations and access flow.
Wet-area
durability
Materials, ventilation and hardware selections should reflect moisture exposure, cleaning regimes and long-term durability within wet end-of-trip environments.
Ventilation
& drying
Ventilation becomes increasingly important where lockers are used for activewear, shoes, helmets and damp garments. Locker internals should support airflow and long- term usability.
Installation
tolerance
Allowance for installation
tolerances, floor variation and service coordination helps reduce on-site modifications and visible gaps during installation.
End-of-trip facilities commonly combine shelving, hanging and accessible lockers and seating within projects.
Made for inclusive spaces
Accessible locker options can be integrated within standard locker layouts to support inclusive workplace, education and change-room environments.
Integrated within
locker layouts
Accessible configurations can be incorporated within shelving and hanging locker systems to support inclusive spaces without separating users from the broader environment.
Supports accessible design requirements
Locker configurations can assist projects designed in accordance with AS1428 accessibility standards and NCC accessibility provisions
Designed for changing user needs
Inclusive locker planning helps future-proof facilities by supporting a broader range of occupants and visitors over time, including people with mobility limitations, temporary injuries, reduced dexterity or low vision.
Learn more
Available in laminate, steel and hybrid constructions with commercial finishes selected around project durability, maintenance and aesthetic requirements.
Materials & finishes to fit your project
Lockin lockers are available in laminate, steel and hybrid constructions, with finishes and detailing selected around the operational, aesthetic and durability requirements of each project.
Laminate
finishes
Laminate lockers offer a wide range of commercial colours, woodgrains and textured finishes that integrate easily with interior palettes and surrounding joinery systems.
Steel &
powdercoat
Welded steel lockers provide durability, moisture resistance and security, with modern powdercoat finishes and perforation patterns increasingly used as architectural design elements.
Hybrid
options
Hybrid systems combine welded steel locker bodies for strength and durability with laminate doors and finishes for a warmer, furniture-like appearance.
Custom
detailing
Lockers can be configured with perforations, graphics, numbering, signage and ventilation detailing to support branding, wayfinding and architectural integration.
Explore finishes & materials
Explore the range of material and finishes options available
Mechanical, digital and hardwired lock systems to fit locker project operational requirements.
Lock systems that fit operational suitability
Lockin lockers can be configured with mechanical, digital, RFID and hardwired locking systems selected around the operational, security and user requirements of each project
Shared &
assigned use
Lock systems can support both assigned-user and shared-use environments, helping facilities manage changing occupancy, visitor access and daily locker turnover.
Mechanical, digital
& RFID access
Lockers can be configured with key, mechanical combination, digital keypad, RFID and smart lock systems selected around the operational, durability and management requirements of each environment.
Integrated
access systems
Selected locking systems can integrate with existing building access credentials, helping streamline user experience across workplace and education environments.
Configured for your
environment
Lock systems are selected around project requirements including security, moisture exposure, user turnover, maintenance needs and operational workflows.
Projects delivered by
Discuss your project
Our project management team regularly works with architects, designers and builders to review layouts, locker configurations and specification details early in the project process.